Add-on identification
Tanmatsu supports two types of add-on boards: boards connected to the external ‘CATT’ add-on port and boards connected to the internal add-on port.
Both types of add-on boards can be automatically detected through the inclusion of a small 24C02 EEPROM.
Such an EEPROM stores 256 bytes of information, which Tanmatsu can use to identify the type of add-on board installed.
The three address lines (A0, A1 and A2) of the EEPROM chip are pulled down to ground. This sets the address of the EEPROM chip on the I2C bus to 0x50.
Reference schematic for CATT add-on boards

Reference schematic for internal add-on boards
